Step by Step instructions for Multichoice decoders:

Multichoice Decoder: Single & Duel View 

• Press
• menu on remote
• Advanced options-OK
• Dish installations-OK
• 9949
• (7) Reset to factory defaults – OK - OK
• When done scanning
• Press menu on remote
• Advanced options-OK
• Dish installations-OK
• 9949
• Go to Network 2 then press the right arrow button until you see the word “other”
•  DO NOT PRESS OK
• Scroll down to (6) Scan All Networks – OK-OK
• When done scanning

   To watch Maranatha TV:

  1. On your remote control, press TV button
  2. Press the ‘Up Arrow” button on your remote
  3. Find and select PUBLIC PAS 7/10 and press OK
  4. Press the P+ button on your remote until you find the Maranatha TV

If  you are still not able to view Maranatha TV then use the below method:

Multichoice Decoder: PVR & {old single view (+- 5 yrs)}

• On your REMOTE CONTROL Press the MENU button
• Press 6 for ADVANCED OPTIONS
• Press 1 for DISH INSTALLATIONS
• Enter PIN code: 9949
• Press 1 for LNB CONFIGURATION and press OK
• Press 2 for LNB 2 SETUP (Option A, Position B) and press OK
• Press 1 for LNB. It should be “DISABLED. Press OK
• Press the left arrow button once, ‘DISABLED’ should now change to ‘ENABLED’. Press OK
• Go to Option 8, ACCEPT THESE SETTINGS and Press OK
• Press EXIT once
• Press 2 for NETWORK CONFIGURATION
• Press 2 for NETWORK 2 SETUP. (If 2 is greyed out, use NETWORK 3 SETUP)
• On SIGNAL SETUP press the OK to highlight DISABLED
• Press ‘Right arrow’ (>) to change ENABLED and press OK
• Make sure #2 ‘ORBITAL POSITION’ is PAS 7/10
• Make sure #3 ‘USE NIT’ is YES
• Press 4 for FREQUENCY: (You may need to press OK Before the next step)
• Press ‘Left arrow button (<) 5 times
• Enter 11169 and press OK to save
• Press 5 for SYMBOL RATE: (you may need to press OK before the next step)
• Press the ‘left arrow’ button (<) 5 times
• Enter 26650 & OK to save
• Make sure #6 POLARIZATION’ is VERTICAL
• Press 7 for FEC (you may need to press OK before the next step)
• Press left arrow button (<) until it reads 1/2
• Press OK button to save
• Press 8 to VIEW SIGNAL STRENGTH then press OK button to save
• When saved press EXIT — once only!
• Press 4 to SCAN ALL NETWORKS
• After Scanning process is complete, receiver may go to channel 1 or to another DSTV channel
• Go to channel 4 which should be MOVIE MAGIC

   

  To watch Maranatha TV:

  1. On your remote control, press TV button
  2. Press the ‘Up Arrow” button on your remote
  3. Find and select PUBLIC PAS 7/10 and press OK
  4. Press the P+ button on your remote until you find the Maranatha TV